In the face of dynamic changes in the power system, the introduction of hourly dynamic tariffs and growing ESG reporting requirements, the traditional model of purchasing electricity from the grid has become a factor of high financial risk for enterprises. The industrial sector is currently responsible for about 37-38% of global final energy consumption and 30-35% of CO₂ emissions. In the Polish economic reality, the comprehensive energy transition has ceased to be just an expression of corporate social responsibility, and has become a hard economic calculation and a requirement to maintain a competitive advantage.
The combination of three key renewable energy sources (RES) technologies – large-scale photovoltaics, industrial energy storage (BESS) and high-temperature heat pumps – allows to create a closed, synergistic energy ecosystem. Integrated RES installations reduce the company’s operating costs by up to 60-80%, protect the plant from power outages (blackout) and eliminate the risk of negative energy prices on the balancing market.
Investing in commercial photovoltaics alone solved the problems of enterprises in the old billing models. In the current regulatory and market environment, solar power generation coincides with market peak supply, leading to drastic declines in the value of energy sold to the grid and, in extreme cases, to shutdowns of installations by distribution system operators (DSOs).
Only by integrating the three technologies can full energy and process efficiency be achieved in an industrial plant or service company:

For most companies, the energy load falls between 7:00 a.m. and 5:00 p.m., which perfectly coincides with the production curve of photovoltaic panels. However, the key to success in the B2B sector is not to maximize installed capacity, but to precisely match the generation profile to the demand profile (the so-called self-consumption without giving away).
Key benefits of PV for business:
BESS (Battery Energy Storage System) energy storage systems are no longer treated only as an optional backup power supply (UPS). They have become an advanced financial and operational tool, managed by BMS (Battery Management System) and EMS (Energy Management System) algorithms.
Main functions of BESS in the enterprise:
Process heat and heating of large-scale production or storage halls generates significant operating costs. Industrial heat pumps combined with existing infrastructure (e.g. hybrid system with gas or oil boiler room) reduce the consumption of fossil fuels by 70-80%.
Heat pumps in industrial plants use waste heat from technological processes (e.g. from cooling machines, compressor rooms or process wastewater), raising the efficiency of the entire system (COP) to levels unavailable for the commercial and residential sector.
The table presents a list of investment options for a medium-sized production plant with an annual electricity consumption of 500 MWh and a demand for technical heat.
| Parameter/Variant | Variant A: No RES (100% Grid + Gas) | Variant B: Photovoltaics itself (150 kWp) | Variant C: RES Triad Complex (PV 150 kWp + BESS 200 kWh + heat pump) |
| Self-consumption level of energy | 0% | 35-45% | 80-95% |
| Reduction of gas/oil consumption | 0% | 0% | 70-80% |
| Failure of Power Protection (UPS) | None | None (inverter off) | Complete protection of critical processes |
| Capacity fee reduction | 0% | approx. 30% | up to 85% |
| Estimated Payback Time (ROI) | N/A | approx. 5-6 years | approx. 3.5-5 years (including grants) |
| Impact on ESG/CO₂ metrics | None | Medium (Scope 2) | Very High (Scope 1 and Scope 2) |
The best proof of the effectiveness of the synergy of RES technologies in industry is the comprehensive implementation carried out by Hymon for the world leader in construction chemicals – Henkel Polska (Production Plant in Stąporków).

Investor’s challenge:
The Henkel plant in Stąporków was struggling with the need to gradually decarbonize production processes and reduce the consumption of fossil fuels (heating oil and natural gas). The goal was to carry out a full transformation at an active industrial facility, without stopping the continuity of production processes and while maintaining strict fire protection standards and plant logistics.
Scope of work performed by Hymon as a General Contractor:
Documented results of the Henkel x Hymon project:
The implementation of a comprehensive energy project in a company requires an engineering approach. At Hymon, this process is carried out in a 360° care system:
Is energy storage necessary in a company if we already have a photovoltaic installation?
It is not formally mandatory, but in the new market environment it becomes a condition for PV profitability. Industrial energy storage (BESS) allows you to avoid shutdowns of PV installations by the operator at peak generation, reduces fees for exceeding the ordered capacity and allows batteries to be charged during hours with the lowest electricity rates.
What are the options for financing RES investments for enterprises in 2026?
The investment can be financed through operating/financial leasing, loans with an environmental bonus from Bank Gospodarstwa Krajowego (BGK), funds from the National Fund for Environmental Protection and Water Management (NFOŚiGW) and regional subsidies. The PPA (Power Purchase Agreement) model, in which the investor does not incur initial capital outlays, is also gaining popularity.
Will a heat pump be able to heat a fuel-intensive industrial facility in winter?
Yes. Modern high-temperature heat pumps selected for industrial applications work efficiently even at outdoor temperatures as low as -25°C. In the case of facilities with a specific thermal profile, hybrid systems are commonly used, in which the heat pump covers up to 80-90% of the annual demand, and the existing source (e.g. gas boilers) is switched on only in moments of extreme frost.
How long does the design and installation process of an integrated RES system take for a company?
The implementation time depends on the capacity of the installation and formal and legal requirements. The construction and assembly stage usually takes from 2 to 6 weeks. The entire process – including the audit, obtaining connection conditions from the DSO and the building permit – usually takes 3 to 7 months.
Are you planning to optimize energy costs in your company? Consult with Hymon Powered by Kajima experts and order a free energy audit with ROI simulation for your plant!
449.82 kWp photovoltaic system | industrial heat pumps, approx. 750 kW | integration with the plant’s existing infrastructure
The Henkel plant in Stąporków underwent a comprehensive energy modernization project covering two key areas: electricity generation from a photovoltaic system and a change in the method of heat generation through the implementation of industrial heat pumps.
The project was carried out at an operational industrial facility, without disrupting the facility’s day-to-day operations. This required precise coordination of the work with the existing infrastructure, production schedule, plant logistics, and safety requirements.
Hymon was responsible for the project’s implementation as the general contractor and energy partner.
| Object | ZakładThe Henkel Plant in Stąporków |
| Type of Investment | Comprehensive Energy Transformation of an Industrial Facility |
| Scope | Photovoltaic System + Industrial Heat Pumps |
| PV System Capacity | 449,82 kWp |
| Number of modules | 918 units |
| Module Technology | Jinko Solar |
| Heat pump capacity (total) | ~750 kW |
| Number of heat pumps | 3 industrial heat pumps |
| Annual PV production | ~398 683 kWh |
| Reduction of CO₂ emissions | ~474.4 metric tons per year |

The energy transition project at the Henkel plant included two complementary systems:
a photovoltaic system and a cascade heat pump system. Their combined operation helps increase self-consumption of energy from renewable sources and reduce the use of conventional heat sources.
A 449.82 kWp photovoltaic system installed on the roofs of two warehouses
The photovoltaic system was installed on the roofs of two industrial buildings. The system was designed taking into account the available roof area, the technical conditions of the facility, and the plant’s electricity demand profile.
PV System Specifications
Industrial heat pumps with a capacity of approximately 750 kW
The second pillar of the investment was the implementation of industrial heat pumps with a total capacity of approximately 750 kW. The system was designed to serve as a supplementary source for the plant’s heating and process needs, integrated with the existing oil-fired boiler room.
The scope of work on the heat pump system included
The project was carried out at an active industrial facility, which significantly increased the complexity of the implementation. The work had to be carried out without disrupting the facility’s daily operations. This required proper phasing of the work, technical agreements, and ongoing coordination with facility representatives.
The new heat pump system had to be integrated into the plant’s existing heating system. It was crucial to ensure safety, stable operating parameters, and the ability of the heat sources to work together. The heat pumps required the preparation of a reinforced concrete foundation and appropriate installation logistics. Due to the size and weight of the equipment, precise planning of the work was essential.
The installation included DN200-diameter pipelines, which required proper preparation of the technical space, installation, and interdisciplinary coordination. Part of the work was carried out under conditions of limited access and existing utility infrastructure. This required customizing technical solutions during the execution phase.
To complete the process connections, earthwork was necessary, including a trench under the plant road. This stage required special coordination with the plant’s logistics team.
The implemented system reduces the use of conventional heat sources and increases the share of renewable energy in the plant’s operations. The project integrates electricity generation from renewable energy sources, industrial heat pumps, hydraulics, automation, and monitoring into a single, cohesive energy system.

Yes. Implementation at an operational facility is possible, but it requires very precise planning, phased execution, and coordination with the facility’s existing infrastructure. In the case of the Henkel plant in Stąporków, the project included both a photovoltaic system and industrial heat pumps integrated with the existing oil-fired boiler room. The work had to take into account the plant’s schedule, safety, logistics, and limited technical space.
In large industrial facilities, the greatest value comes not from a single technology, but from an integrated energy system. Photovoltaics generate electricity, but their potential increases when they are integrated with the facility’s actual consumption profile, heating system, automation, and monitoring. In the Henkel project, a 449.82 kWp PV system works in conjunction with industrial heat pumps with a capacity of approximately 750 kW to support the facility’s electricity and heating needs.
Before starting the project, it is necessary to analyze not only the energy demand but also the condition of the existing infrastructure, available roof space, installation options, the heating system, automation, connections, plant logistics, and working conditions. Key aspects of the Henkel project included the roofs of two halls, integration with the oil-fired boiler room, a hydraulic system with a glycol circuit, DN200 pipelines, heat buffers, PLC + HMI control, and system operation monitoring.
The results depend on the facility’s operating profile, energy demand, and the technologies selected. In the case of the Henkel plant, the project makes it possible to increase the share of renewable energy in the energy mix, reduce the operation of oil-fired boilers by at least 70%, and cut CO₂ emissions by approximately 474.4 metric tons per year. This type of investment can therefore support not only environmental goals but also greater predictability, control, and efficiency in the operation of the plant’s energy infrastructure.
Contact us!
There is more and more talk about ESG in the context of the activities of companies, especially in Europe, where sustainable development becomes not only a trend, but also a legal obligation. In this article, we will explain what ESG is exactly, what will include the report, who has to prepare for it, what are the implementation dates and what activities can help optimize costs and meet these requirements.
ESG is an abbreviation of three key areas of the company’s activity: environmental (environment), sOCIAL (social) and GOvernance. It is a set of standards for assessing the company’s activities in terms of its impact on the natural environment, social responsibility and management practices.
The photovoltaic installation with a capacity of 50 & nbsp; kwp & nbsp; allows for annual production of approximately 55,000 kWh of energy, which largely meets the needs of medium-sized enterprises. This means significant savings on electricity bills, which contributes to the reduction of the company’s operating costs.
The growing pressure from the public, investors and governments to act with the principles of sustainable development means that ESG is no longer just a “good habit” – it becomes a legal obligation. In the European Union, the implementation of ESG principles is part of a larger “green order” strategy, the aim of which is to achieve climate neutrality by 2050.
In the context of supporting sustainable development initiatives, the so-called Eco-credits that are offered on much more favorable terms than traditional loans. It is part of the “green financing” strategy (the so-called “green money support”), thanks to which banks can grant such loans with lower interest rates. This is because financial institutions receive additional funding for these initiatives, which enables them to offer preferential terms. This support additionally encourages both companies and individuals to pro-ecological investments, contributing to the achievement of the Sustainable Development Goals.
ESG reporting applies to both large companies and smaller enterprises that cooperate with larger organizations or operate on international markets. The largest enterprises (with turnover over EUR 40 million) are obliged to do so, but this trend is also quickly embracing medium and smaller companies, which become subcontractors or suppliers for larger corporations.
The new ESG reporting regulations will gradually come into force over the next few years. According to the guidelines CSRD (Corporate Sustainability Reporting Directive), starting in 2024, the largest enterprises will be required to submit reports in accordance with the new standards, and smaller companies will gradually be covered by this obligation in the following years.
The ESG report will include:
Companies that will not meet the ESG reporting requirements may face various consequences:
• Legal sanctions: Depending on the country, failure to meet the requirements may result in financial penalties.
• Loss of investor confidence: The lack of transparency in the ESG area may result in a loss of confidence of investors who more and more often prefer sustainable investments.
• Problems with financing: Financial institutions are starting to pay more and more importance to ESG indices when assessing credit risk.
In order to optimize the costs of the enterprise and meet the ESG requirements, it is worth applying several strategies:
ESG reporting is not only an obligation, but also an opportunity for companies to optimize processes, reduce operating costs and improve their reputation in the market. Entrepreneurs who are already implementing activities in the field of environmental protection, social responsibility and corporate governance will have a competitive advantage when the regulations come into force.
Summarizing, Implementation of ESG principles in the company’s operations is a process that requires commitment, but is an inevitable step towards the future of a more responsible business. Thanks to investments in renewable energy sources, such as photovoltaic installations, and by optimizing internal processes, companies can not only meet legal requirements, but also improve their profitability and image in the eyes of investors and customers.
Invest in the future of your company today And make sure that ESG becomes an integral part of the development strategy.
A heat pump is a device that is increasingly installed in buildings. It is cheap to use, comfortable to use, energy-saving and safe. Heating the house with a heat pump also has a beneficial effect on the natural environment, because the system uses renewable energy sources for its operation, and does not produce harmful exhaust gases during operation. Do you want to find out what the heat pump consists of and how does it work? You will find the answers to these questions in the article below!
A heat pump is a heating device that uses renewable energy sources. It absorbs heat from the environment, i.e. from the so-called lower heat source: from the air, from the ground or from the water, and then directs to the heating system of the building. In order to ensure the correct operation of the heat pump, electricity is necessary, but only to drive the compressor. Heat pumps base their work mainly on energy derived from natural resources.
What exactly is the principle of operation of a heat pump? Heat is collected using a heat exchanger, and then, by means of a refrigerant (also called a working medium), it is subjected to thermodynamic changes, during which its state of aggregation changes. The exact diagram of the heat pump operation can be found in the article: Heat pumps – how do they work?
Heat pumps have a similar internal structure, but the way they operate, as well as the efficiency of the heat pump, may be slightly different depending on what the lower heat source is. Thus, it is distinguished:
All heat pumps have the same components, although depending on the type of pump they are located in different places (the difference is especially visible in the case of air heat pumps, which may be used as a heat pump, air, water, split or a heat pump, air, water, monoblock – more You can find out about their construction in the article: Heat pump monoblock or split?).
How is the heat pump built? Its basic components are:
Without a compressor, evaporator, condenser, expansion valve and operating medium, the operation of the heat pump would not be possible. Want more information about heat pumps? Are you interested in their installation in your home? Contact us and we will answer all your questions!